Exicom Power Solutions

Introduction

Exicom's M2000 is a state of the art and flexible controller platform for monitoring all types of DC power systems. It provides various incremental updates to our current M1000 platform such as bigger TFT, joystick, web security, analog alarm engine and much more. Whether it is remote monitoring capabilities, or integrated functions to do energy management via control of site infrastructure or support for advance battery types; M2000 is one of the most advanced controllers available in market today.

Key Features

2.2” TFT display with high resolution for enhanced visibility, joystick for user navigation
10/100 Mbps Ethernet interface for local and remote monitoring, secure embedded web server
Encrypted and digitally signed firmware and configuration files for enhanced web security
Site infrastructure control and renewable hybrid system support
Li-ion battery support and advanced battery management & testing methods
SNMP Traps and emails for alarm reporting
Multi language support
User configurable performance logs, event logs, energy logs, inventory logs and change logs
Analog alarm engine and digital logic alarms
USB interface for configuration file update and log download
Offline configuration tool with full parameter flexibility
EN 60950-1, EN 55022 (Class B), EN 55024, EN 300019-1-1/2/3, ROHS complied

Key Technical Specifications

General:

Operating voltage: 36 – 70Vdc
Low power consumption: 3W (Nominal)
Dimensions (wxdxh): 115 x 130 x 43 mm
Operating temperature range: -20°C to +60°C

System Interfaces / Slave Units:

Supports small to large systems by controlling up to 120 rectifiers
Dynamic battery current control and temperature compensation
Supports multiple slave analog interface units
Single analogue interface unit provides 6 voltage, 3 current, 2 temp. channels and 3 LVD
Up to 64 potential free inputs / outputs
Support for DG control and renewable hybrid system by simple configuration changes

Communication Interfaces:

2 x isolated system CAN bus
2 x isolated RS485 – Modbus RTU configurable for multiple slave devices and functions
1 x RS 232 – For GSM / GPRS / 3G modem
10/100 Mbps Ethernet interface – MDI / MDI-X, Auto negotiation, Static / DHCP IP, IPv4 / IPv6, HTTP / HTTPS, SNMP V2c / V3, SNTP, SMTP and FTP
USB 2.0 interface – supports mass storage. Host mode and device mode for programming
LEDs for alarm indications

Ordering Information and downloads

Introduction

Exicom's M1000-X controller platform covers all control and monitoring needs of small to large sized DC power systems with amazingly simple and easy user interface. Whether it is remote monitoring capabilities, or integrated functions to do energy management via control of site infrastructure or support for advance battery types; M1000 is a no compromise and highly flexible controller for your needs.

Key Features

Key Technical Specifications

General:

Operating voltage: 20V – 70V
Power consumption: 5W (Nominal)
Dimensions (WxDxH): 130mm x 145mm x 43mm
Operating temperature range: -20°C to +60°C

System Interfaces / Slave Units:

Supports small to large systems by connecting upto 100 rectifiers
Dynamic battery current control and temperature compensation
Upto 6 voltage, 7 current channels and 3 temperature channels with slave interface unit
Up to 5 LVD controls
Up to 40 potential free inputs / outputs
Support for DG control and renewable hybrid system

Communication Interfaces:

2 x isolated system CAN bus
2 x isolated RS485 – configurable for multiple slave devices and functions
Modbus RTU interface for SCADA system
1 x RS 232 – For GSM / GPRS / 3G modem
10/100 Mbps Ethernet interface – MDI / MDI-X, Static / DHCP IP, IPv4 / IPv6, HTTP, SNMP V2c / V3, SNTP and FTP
LEDs for alarm indications

Ordering Information and downloads

Introduction

Exicom’s M1000-H controller platform covers all control and monitoring needs of small to medium sized DC power systems with limited load and battery measurements. The controller along with its backplane is hot pluggable making maintenance very simple. Taking most of the advanced features from its parent M1000 product, this is a comprehensive feature controller and does not need additional slave cards in most of the cases, which make it a compact solution for space demanding applications

Key Features

Key Technical Specifications

General

Operating Voltage: 20V – 70V
Power Consumption: 5W (Nominal)
Dimensions: 130mm x 145mm x 43mm (W x D x H)
Operating Temperature Range: -20°C to +60°C

System Interfaces:

Supports small to large systems by connecting upto 60 rectifiers
Dynamic battery current control and temperature compensation
Upto 3 voltage, 2 current channels and 1 temperature channel
Up to 2 LVD Controls – one each for battery and load
Up to 8 potential free inputs / outputs using external unit

Communication Interfaces:

1 x isolated system CAN bus
1 x isolated RS485
10/100 Mbps Ethernet interface – MDI / MDI-X, Static / DHCP IP, IPv4, HTTP, SNMP V2c / V3, and SNTP
USB 2.0b interface – supports mass storage. Host mode and device mode for programming
Modbus RTU Interface for SCADA system

Ordering Information and downloads

Introduction

ExiNMS is a state of the art platform for remote tower monitoring where large number of cellular base station sites can be monitored from a single platform. Our RTU unit which can be a standalone product or an integrated part of Exicom’s DC power systems facilitates seamless acquisition of data from every site related to status, performance, site configuration, critical alarms, faults etc. These units can easily be integrated with other hardware for data acquisition as customer’s requirements grow in future. This data can be sent over SNMP, GPRS etc. and is sent to a enterprise grade ExiNMS platform which converts this data into meaningful dashboards, reports and required analytics. The platform can analyse critical alarms instantly and can send SMS, E-mail notifications to required site technicians and operations team for quick fault resolution or escalation. Moreover, intelligent insights around energy usage, consumption patterns, DG Genset usage patterns are provided which help operators and tower companies to reduce Opex and their carbon footprint. It provides operators with 24x7 equipment visibility and helps them streamline operations

Key Features

ExiNMS is state of the art platform for remote tower monitoring to provide users with insightful data for Opex reduction and streamlining operations
ExiNMS Server has several applications that facilitate operations related to fault management, configuration, accounting, inventory, performance, reports & analytics, and security management
ExiNMS application is scalable by adding more leaf servers – maximum of 50,000 devices can be integrated
Standard installations support windows Server. Optionally linux servers can be supported
For event collection and storage, regular polling based parameters collection and storage is there. SNMP, TCP and GSM network devices are supported. Data Archiving is supported
Network can be represented as multilevel tree. Client views can be restricted based on user profiles / rights
Elaborate user rights management and authentication is available
Support for multilevel alarm escalation with auto email and SMS
Support for scheduling and network wide simultaneous system configuration & software upload
Supports third Party devices integration

Key Technical Specifications

Standard web browser based clients. No separate client application is required.
Clients get distinct views for network management modules such as fault, configuration, accounting, inventory, user administration etc., which are completely localized.
Clients can view fault occurring in a network in neatly aligned tabulated views / map views, from type specific node icons in network views, network navigator tree view, and in network alarm summary view.
Perform network administrative functions such as add new networks or nodes, manage faults etc.
Perform user administration tasks such as add / edit users, modifying user profiles, and users.
Schedule reports, generate, and view performance reports in HTML and PDF formats.
Generate alarms, summary, status, energy, product specific performance reports in HTML and PDF formats.
Export to CSV and print the details of network alarms, network inventory, user session logs, etc.

Power Systems

Controllers

Rectifiers & Chargers

Backup Solutions

Li-ion Battery Solutions

EV Charging Solutions

Power Solutions / Controllers

Introduction

Key Features

Key Technical Specifications

General:

System Interfaces / Slave Units:

Communication Interfaces:

Ordering Information and downloads

Download

Introduction

Key Features

Key Technical Specifications

General:

System Interfaces / Slave Units:

Communication Interfaces:

Ordering Information and downloads

Download

Introduction

Key Features

Key Technical Specifications

General

System Interfaces:

Communication Interfaces:

Ordering Information and downloads

Download

Introduction

Key Features

Key Technical Specifications

Ordering Information and downloads

Company

Businesses

Find Us